F.23 Question  [ENDORSED]

Moderators: Chem_Mod, Chem_Admin

Jason Muljadi 2C
Posts: 62
Joined: Thu Jul 27, 2017 3:01 am

F.23 Question

Postby Jason Muljadi 2C » Tue Oct 03, 2017 10:46 am

The CO2 produced by the combustion of hydrocarbons contributes to global warming. Rank the following fuels
according to increasing mass percentage of carbon: (a) ethene, C2H2; (b) propanol, C2H2OH; (c) heptane, C2H16.

Do you simply take the amount of carbon from each hydrocarbon and divide that by the hydrocarbon's molar mass? And for the answer, do you write it as x% of (hyrdrocarbon)?

K Stefanescu 2I
Posts: 68
Joined: Fri Sep 29, 2017 7:04 am

Re: F.23 Question  [ENDORSED]

Postby K Stefanescu 2I » Tue Oct 03, 2017 10:56 am

Yes. For example, for ethene, the mass percentage of carbon would be calculated as follows: ((2* 12.011)/(2*12.011 + 2*1.008)) * 100= 92.3%
I think that most questions requesting mass percentage require that the answer be given as a percentage. I would do so in any case, just to be safe.

Don't forget to repeat this process for each fuel and then rank them from least to greatest C%.

Posts: 25
Joined: Thu Jul 27, 2017 3:01 am

Re: F.23 Question

Postby VahagnAldzhyan » Wed Oct 04, 2017 4:46 pm

Yes. You have to take the molar mass of each compound and then determine how much percent Carbon makes up in each compound.

Yizhou Liu 3L
Posts: 19
Joined: Fri Sep 29, 2017 7:07 am

Re: F.23 Question

Postby Yizhou Liu 3L » Thu Oct 05, 2017 7:36 am

Yes. Also, there's an easy way to do it. Each hydrocarbon in this problem has two carbons, which means the numerators are the same. So you can just compare the denominator by calculating the mass of H2,H2OH and H16.

Jennah Muhammad 1H
Posts: 16
Joined: Sat Jul 09, 2016 3:00 am

Re: F.23 Question

Postby Jennah Muhammad 1H » Sun Oct 08, 2017 6:58 pm

say a problem asked you to find the mass percentage composition and another problem asked you to find the moles of a certain mass. would the process ultimately be the same? You just multiply by 100 when finding the percent composition

Posts: 18889
Joined: Thu Aug 04, 2011 1:53 pm
Has upvoted: 716 times

Re: F.23 Question

Postby Chem_Mod » Sun Oct 08, 2017 11:11 pm

No, the process is not practically the same. When finding the mass percentage of a particular compound, you would need to have the total mass of that substance on which elemental analysis was performed, then, divide the mass of the element in the sample by the mass of the total mass of substance analyzed. So, its basically 1 part of the sample (which happens to be 1 particular element) divided by the whole sample.

Finding the number of moles from a particular mass, in the context of an empirical or molecular formula, is different for whether you are talking about molecules or atoms in that (for the former) if you have an unknown sample, you need to find the molecular formula and then divide the entire sample's mass by its molecular weight (molecular weight can only be found by the molecular formula. When determining an empirical or molecular formula, you work with mass, not moles, because if you compared moles of one element in the sample to moles of another element in a sample, you are not taking into account that the different elements contribute to the total mass of the sample to different degrees depending on the element's molecular weight. Now, if you are determining an empirical formula, you do compare the number of moles of each element present (from the given masses), but this is to find out the subscripts in the formula (the Ratio of moles), not the "mass percentage" of each. Mass percentage and mole percent are very different.

Return to “Empirical & Molecular Formulas”

Who is online

Users browsing this forum: No registered users and 1 guest