## Order of Balancing Rxns

Jerry_T
Posts: 59
Joined: Wed Sep 30, 2020 9:46 pm

### Order of Balancing Rxns

Hey, I was just wondering how everyone approaches balancing chemical reactions in terms of which element to balance first (or the order in general). Also, how do you guys keep track of the number of elements on each side of the eqn (a mental note, tallies, etc.)?

Jasmine Ho 3I
Posts: 55
Joined: Wed Sep 30, 2020 9:41 pm

### Re: Order of Balancing Rxns

I make a chart of every element for both reactants and products to keep track of how many of each element I have. I don't think I necessarily follow an order; I just go with what seems the most obvious at first, I think.

Hannah Rim 2D
Posts: 58
Joined: Wed Sep 30, 2020 9:48 pm
Been upvoted: 1 time

### Re: Order of Balancing Rxns

Hey! When I took AP Chem in high school my teacher would write each element in a column. On the left side of the column she made tallies for the reactants and on the right side she made tallies for the products. Kinda like this:

I C I
II H II
III O III

Honestly, this method might not be that efficient but its what I use and it helps make everything super clear for me (-: Also I don't have a specific way I approach balancing equations but I almost always save the diatomic molecules for last.

rita_debbaneh2G
Posts: 63
Joined: Wed Sep 30, 2020 9:57 pm

### Re: Order of Balancing Rxns

I don't think there's a strict order to it. I personally just make a list of the number of each element on each side of the equation. If they're not equal, then I add numbers as necessary.

Jeffrey Fenn 1G
Posts: 53
Joined: Wed Sep 30, 2020 10:08 pm

### Re: Order of Balancing Rxns

For me personally, I always try to balance the larger molecules first.

Sheryl Ocampo 1D
Posts: 60
Joined: Wed Sep 30, 2020 10:09 pm

### Re: Order of Balancing Rxns

I usually try to balance the atoms that there are the most of in a chemical reaction first and then move to the ones that there are the least of. To keep track of the ones I've balanced, I tally them on the side of the equation.

505598869
Posts: 60
Joined: Wed Sep 30, 2020 9:43 pm

### Re: Order of Balancing Rxns

I find it beneficial to make a chart and list the number of each type of atom on either side of the equation. As I balance things, I cross them off the list. This helps me visualize what has been balanced and what has not. It makes it easier compared to doing it all in my head.

Sukhkiran_Kaur_3I
Posts: 55
Joined: Wed Sep 30, 2020 10:03 pm

### Re: Order of Balancing Rxns

I've tried to just eyeball it by going through the equation, but what works best for me is listing out how many of each atom are on both sides of the equation, and then doing the math and plugging the coefficients back in.

Helena Hu 3E
Posts: 53
Joined: Wed Sep 30, 2020 9:35 pm

### Re: Order of Balancing Rxns

Similarly to Hannah, I make a list on the reactants side and on the products side-- this helps me the most of keeping track of the numbers.
I like to rewrite the equation and leave space at the front of each molecule so that I can fill in the stoichiometric coefficients with a different color.
Then, I start with whatever molecule is the most complex (for me meaning whichever molecule is made up of the most different elements), just because at the end it will be easy to multiply molecules made up of just one element (ex. O2) to finish balancing.

Hopefully this isn't too confusing!

Reese_Gover2K
Posts: 50
Joined: Wed Sep 30, 2020 9:39 pm

### Re: Order of Balancing Rxnx

I typically rewrite the equation with blank spaces in front of each reactant/product and then make a chart counting the number of each element. Then I look at which element would be easiest to balance first and start with that one. And then whenever I write a new coefficient in the equation I alter the numbers of the element in my chart until everything is balanced. That way I can keep track of the number of each molecule while making sure everything is balanced. Hope this can help you!

Gicelle Rubin 1E
Posts: 51
Joined: Fri Oct 02, 2020 12:16 am

### Re: Order of Balancing Rxns

Hi! So, what I usually do is I try to balance the element that there is more of. Afterwards, I sort of "wing it" and try different numbers until the equation is balanced. I know it's not the best method because it requires some time but I'd like to hear other ways to do so! In regards to keeping track, I make a T chart for the reactants and product. I write each element and keep count there. I hope this helped!

Jordan_OBrien_2k
Posts: 53
Joined: Wed Sep 30, 2020 9:43 pm

### Re: Order of Balancing Rxns

What I typically do is make a chart of how many of each element I have on each side. Then I start with the most isolated element then work my way through the more difficult elements to balance

Susan Chamling 1F
Posts: 56
Joined: Wed Sep 30, 2020 9:42 pm

### Re: Order of Balancing Rxns

I think a part of balancing equations is intuition and trial and error, but in my own experience I tend to first look at all of the elements involved and then see which one is the most limited in the sense that it appears in the equation a lesser amount of instances than the other elements. I then work to balance this element first, and then see which other elements were affected by the balancing of that element, and so forth.

Jack_Pearce_2H
Posts: 56
Joined: Wed Sep 30, 2020 9:48 pm

### Re: Order of Balancing Rxns

I would recommend first balancing the atoms that are the least present in the reaction then move onto the second least present and balance those. I usually check after that the second most present ratio is equal to that of the first and move onto the third least present, check from there and repeat the process. Hope this helps!

TiffanyBrownfield 2I
Posts: 51
Joined: Wed Sep 30, 2020 9:42 pm

### Re: Order of Balancing Rxns

Personally, I start by balancing the element that is least common (or elements that only appear in one molecule) so you can get a foundation, and leave the more common and isolated elements for last (i.e. O2). This makes it much easier to make adjustments in the end that won't affect the entirety of your balanced equation.

Danielle Goldwirth 3F
Posts: 62
Joined: Wed Sep 30, 2020 10:07 pm

### Re: Order of Balancing Rxns

I draw a vertical line down (below the arrow in the chemical equation) and then I write each element on the reaction side and on the product side on both sides of the line. I then write down the original amount of moles of each element/molecule and look for what should be balanced and continue the process.

Emily_Stenzler_2H
Posts: 124
Joined: Wed Sep 30, 2020 10:02 pm

### Re: Order of Balancing Rxns

I try to save molecules that originally have one component, such as O2 or F2. These can easily be modified however needed at the end because you don't have to worry about changing the amount of any other atoms. Molecules with more components are typically harder to balance because you have to keep track of how the multiplication of one number affects the amount of all atoms in the molecule.

Marco Vivar 3G
Posts: 55
Joined: Tue Feb 25, 2020 12:15 am

### Re: Order of Balancing Rxns

I usually start out by listing the elements on either side and their respective count. Following that I will balance the smallest numbers first until I see a pattern.

Dane_Beasley_1E
Posts: 49
Joined: Wed Sep 30, 2020 9:42 pm

### Re: Order of Balancing Rxns

For Balancing Rxns, I usually try to balance metals first. Then I would balance carbon. If hydrogen and oxygen are in the equation, I would balance hydrogen next and oxygen last always. I try to stick to this most of the time.

Jose Miguel Conste 3H
Posts: 57
Joined: Sat Oct 03, 2020 12:15 am

### Re: Order of Balancing Rxns

How I keep on track is basically I write the amount of moles of the certain element on top of it, for example CO2 I put 1 on top of C and 2 on top of O, after labeling all the elements, I check both sides if both sides of the equation have the same amount moles of elements. Then if there are any changes needed, I start to multiply and check if both sides are equal! hope this helps.

Kelly Tran 1J
Posts: 100
Joined: Wed Sep 30, 2020 9:50 pm
Been upvoted: 1 time

### Re: Order of Balancing Rxns

Personally, I balance the elements from left to right. I find that it is easier to do balance chemical equations in this way because you are able to keep track of which elements you have already balanced and which ones you have not. I keep track of the coefficients in my head because I find that writing them down or keeping tallies can get confusing if the coefficients of a later element affects the coefficients of a previous element, but this is my personal opinion. Everyone has their own methods.

Tobie Jessup 2E
Posts: 54
Joined: Wed Sep 30, 2020 10:02 pm

### Re: Order of Balancing Rxns

It definitely helps to start with the element that occurs the least and work from there! sometimes there can be a bit of tail and error to balance each side of the equation.

Nick Saeedi 1I
Posts: 66
Joined: Wed Sep 30, 2020 9:39 pm

### Re: Order of Balancing Rxns

I start with balancing the ones that occur the least and mark my progress with tallies next to the question.

Jacob Schwarz-Discussion 3I
Posts: 55
Joined: Wed Sep 30, 2020 10:01 pm

### Re: Order of Balancing Rxns

Hey Jerry!
When it comes to balancing reactions, I would definitely start with the element that occurs the least. From there, I would recommend keeping two columns(one for products and one for reactants) to keep it organized and keep track of the elements as you go through with balancing. Keep track as you go through and when finished balancing, check your work and make sure all of your elements are not divisible by each other.