Temperature in PV=nRT


Moderators: Chem_Mod, Chem_Admin

Kellina Tran 2I
Posts: 50
Joined: Sat Jul 22, 2017 3:00 am

Temperature in PV=nRT

Postby Kellina Tran 2I » Thu Nov 30, 2017 2:05 am

What is the unit we should be using for temperature in PV=nRT?

Rachel Lu_dis1H
Posts: 66
Joined: Fri Sep 29, 2017 7:06 am
Been upvoted: 1 time

Re: Temperature in PV=nRT

Postby Rachel Lu_dis1H » Thu Nov 30, 2017 9:14 am

Temperature is in Kelvin (K)

Golbarg Rahimi 3k
Posts: 26
Joined: Sat Jul 22, 2017 3:01 am

Re: Temperature in PV=nRT

Postby Golbarg Rahimi 3k » Thu Nov 30, 2017 12:25 pm

We have to use Kelvin temperature since in this formula T could be at the denominator. If we were using Celsius unit, then we would have had zero at the denominator at some point. Because a zero denominator does not give us a solution, we use kelvin. when kelvin is zero that suggests we have an absolute zero temperature and there would be no gas law.

snehabhargava
Posts: 52
Joined: Thu Jul 13, 2017 3:00 am

Re: Temperature in PV=nRT

Postby snehabhargava » Fri Dec 01, 2017 11:05 am

The standard units for temperature is Kelvin (K)

Cassandra Mullen 1E
Posts: 54
Joined: Fri Sep 29, 2017 7:07 am
Been upvoted: 2 times

Re: Temperature in PV=nRT

Postby Cassandra Mullen 1E » Sun Dec 03, 2017 8:02 am

If you're given the temperature in celsius, you can easily convert it to Kelvin by adding 273.15

Carlos Gonzales 1H
Posts: 50
Joined: Fri Sep 29, 2017 7:05 am
Been upvoted: 1 time

Re: Temperature in PV=nRT

Postby Carlos Gonzales 1H » Sun Dec 03, 2017 2:32 pm

The unit we use for temperature in this equation is Kelvin (K). If the temperature is given in Celsius, add 273.15 to convert to Kelvin.

Yuting Zhu 3D
Posts: 17
Joined: Tue Oct 10, 2017 7:14 am

Re: Temperature in PV=nRT

Postby Yuting Zhu 3D » Sun Dec 03, 2017 10:15 pm

Just adding to that, temperature is the most determining factor of the characteristic of the gas.

HussainNaib1D
Posts: 9
Joined: Fri Apr 06, 2018 11:04 am

Re: Temperature in PV=nRT

Postby HussainNaib1D » Sun May 27, 2018 3:56 pm

Temperature has to be in Kelvin always. Unlike P or V in the PV=nRT equation, where P can be in atm/Pa/etc or V can be L/m^3/etc or they can both be combined into eV/J/cal, T always has to remain in K (similar to n, which always has to remain in mol).

Tony Chung 2I
Posts: 60
Joined: Fri Sep 28, 2018 12:19 am

Re: Temperature in PV=nRT

Postby Tony Chung 2I » Wed Jan 09, 2019 3:08 pm

The unit for T in this case is always in Kelvin (K)

Niveda_B_3I
Posts: 60
Joined: Fri Sep 28, 2018 12:24 am

Re: Temperature in PV=nRT

Postby Niveda_B_3I » Wed Jan 09, 2019 4:55 pm

Kelvin is the SI unit for temperature.


Return to “Ideal Gases”

Who is online

Users browsing this forum: No registered users and 2 guests