Conditions
Moderators: Chem_Mod, Chem_Admin
-
- Posts: 14
- Joined: Mon Jan 06, 2020 7:22 am
-
- Posts: 100
- Joined: Wed Sep 30, 2020 9:41 pm
Re: Conditions
I believe that the temperature is 273.15 K (or 0 degrees celsius) and the pressure is 0.986 atm (or 100 kPa) at STP.
Re: Conditions
"STP" means standard temperature and pressure. It is commonly given in K and atm: 273K (equal to 0 degrees C) and 1 atm.
-
- Posts: 58
- Joined: Wed Nov 18, 2020 12:29 am
-
- Posts: 100
- Joined: Wed Sep 30, 2020 9:48 pm
-
- Posts: 101
- Joined: Wed Sep 30, 2020 9:54 pm
-
- Posts: 107
- Joined: Wed Sep 30, 2020 9:45 pm
Re: Conditions
The standard temperature and pressure would be 273K, which is equal to 0 degrees Celsius, and 1 atmosphere.
-
- Posts: 101
- Joined: Wed Sep 30, 2020 9:34 pm
-
- Posts: 104
- Joined: Wed Sep 30, 2020 9:37 pm
-
- Posts: 56
- Joined: Wed Nov 25, 2020 12:19 am
Re: Conditions
SamayaJoshi1A wrote:Can someone clarify why we have these numbers set as the STP?
0 degrees Celsius and 1 atm is the freezing point of pure water at sea level atmospheric pressure. Gases are dependent on temperature and pressure, so we use these values as a reference condition.
-
- Posts: 96
- Joined: Wed Sep 30, 2020 10:09 pm
-
- Posts: 111
- Joined: Wed Sep 30, 2020 10:01 pm
Re: Conditions
STP stands for standard temp and pressure. STP is 1atm(technically .986 but Lavelle uses 1 atm) and 273.15K.
-
- Posts: 53
- Joined: Wed Nov 18, 2020 12:32 am
-
- Posts: 105
- Joined: Sat Oct 03, 2020 12:15 am
-
- Posts: 50
- Joined: Wed Nov 18, 2020 12:30 am
Re: Conditions
STP is 273.15 K and 1 atm of pressure (technically it is a little less than 1 atm, but we usually just approximate it to 1 in this class).
-
- Posts: 143
- Joined: Wed Sep 30, 2020 10:02 pm
-
- Posts: 122
- Joined: Wed Sep 30, 2020 9:52 pm
- Been upvoted: 2 times
Re: Conditions
Hi! STP stands for standard temperature and pressure. Under STP conditions, the temperature would be 273K and the pressure would be 1 atm. Hope this helps! :)
-
- Posts: 113
- Joined: Wed Sep 30, 2020 9:55 pm
Re: Conditions
STP stands for standard temperature and pressure. These values are 1 atm and 273.15 Kelvin.
Who is online
Users browsing this forum: No registered users and 9 guests