Conditions

[Sameer Gupta 2F]

What are the values for pressure and temperature at STP in the form of Kelvin and atm?

[Kiran Singh 3A]

I believe that the temperature is 273.15 K (or 0 degrees celsius) and the pressure is 0.986 atm (or 100 kPa) at STP.

[alette1a]

"STP" means standard temperature and pressure. It is commonly given in K and atm: 273K (equal to 0 degrees C) and 1 atm.

[Gwirnowski 3B]

The standard temp for Kelvin would be 273 and atm would be 1

[SLai_1I]

STP conditions are 273 Kelvin and 1 atm.

[Morgan Gee 3B]

0 degrees celsius, 273 K, 1 atm, 760 mmHg, 101.3 kPa, and 1 M

[Jamie2002]

It's 273.15 K for temperature, 1 bar (which is 100 kPa) for pressure

[Bai Rong Lin 2K]

Kelvin would be 273K whereas atm would be 1 atm

[Jaclyn Schwartz 1I]

The standard temperature and pressure would be 273K, which is equal to 0 degrees Celsius, and 1 atmosphere.

[AlbertGu_2C]

273.15 K is equal to 0 Celsius, so the standard is 273.15 K and 1 atm

[SamayaJoshi1A]

Can someone clarify why we have these numbers set as the STP?

[Fiona Huang 3C]

Can someone clarify why we have these numbers set as the STP?

0 degrees Celsius and 1 atm is the freezing point of pure water at sea level atmospheric pressure. Gases are dependent on temperature and pressure, so we use these values as a reference condition.

[Queena Chu 3E]

It’s given as 273K (or 0°C) and 1 atm

[David Y]

1 atm and 273 degrees Kelvin

[Jacob Schwarz-Discussion 3I]

STP stands for standard temp and pressure. STP is 1atm(technically .986 but Lavelle uses 1 atm) and 273.15K.

[Aarushi Verma 2I]

STP is at 1 atm and 273.15 K or 0 C.

[Jose Miguel Conste 3H]

stp means standard temp and pressure, 273k and 1 atm

[Hope Fan 2A]

STP is 273.15 K and 1 atm of pressure (technically it is a little less than 1 atm, but we usually just approximate it to 1 in this class).

[Rose_Malki_3G]

Pressure is 1 atm and and temperature is 273 K

[Emmeline Phu 1G]

Hi! STP stands for standard temperature and pressure. Under STP conditions, the temperature would be 273K and the pressure would be 1 atm. Hope this helps! :)

[Jason Knight - 1F]

STP stands for standard temperature and pressure. These values are 1 atm and 273.15 Kelvin.