Reversible expansion and work in a vacuum
Moderators: Chem_Mod, Chem_Admin
Reversible expansion and work in a vacuum
In lecture today, Dr. Lavelle described that a gas expanding against a vacuum is reversible, and that as it expands, it does work against the piston (loses energy) that is then compensated by the heat (gain in energy). I'm a little confused, however, how could the gas be said to be doing work when it's expanding against a vacuum? Thank you so much!
-
- Posts: 77
- Joined: Fri Sep 29, 2017 7:05 am
- Been upvoted: 2 times
Re: Reversible expansion and work in a vacuum
I believe the piston had a string with mass attached to it on the outside of the chamber. Not fully sure, but I would recommend looking at the picture in your notes again.
-
- Posts: 31
- Joined: Sat Jul 22, 2017 3:00 am
Re: Reversible expansion and work in a vacuum
As I recall from the book, a system does no expansion work when it expands into a vacuum because there is not an opposing force (pressure is 0). However, in Lavelle's lecture today, I believe he included a mass that was outside the vacuum chamber attached to the piston by a string. Because the expansion of the gas, though in a vacuum, raises the mass and work, as explained in the book is "the transfer of energy to a system by a process that is equivalent to raising or lowering a weight," work is being done.
Return to “Calculating Work of Expansion”
Who is online
Users browsing this forum: No registered users and 9 guests