Uses of different formulas


and

Moderators: Chem_Mod, Chem_Admin

Katherine Grillo 1B
Posts: 69
Joined: Fri Sep 28, 2018 12:28 am

Uses of different formulas

Postby Katherine Grillo 1B » Tue Feb 12, 2019 10:17 pm

How do I know when to use w=-pv vs w= -nrT ln(V2/V1) ?

Becky Belisle 1A
Posts: 81
Joined: Fri Sep 28, 2018 12:18 am

Re: Uses of different formulas

Postby Becky Belisle 1A » Tue Feb 12, 2019 10:21 pm

w= -PΔV should be used for irreversible expansions, and it is probably stated in the question if the process is irreversible. w=-nRTln(V2/V1) is for reversible expansions.

Ray Guo 4C
Posts: 90
Joined: Fri Sep 28, 2018 12:15 am

Re: Uses of different formulas

Postby Ray Guo 4C » Tue Feb 12, 2019 10:26 pm

If the external pressure is constant, it's irreversible expansion.

chloewinnett1L
Posts: 55
Joined: Fri Sep 28, 2018 12:20 am

Re: Uses of different formulas

Postby chloewinnett1L » Tue Feb 12, 2019 10:29 pm

W=-Pext(deltaV) is used when there is a constant external pressure outside of a system, and the system irreversibly expands into its surroundings, doing a certain amount of work. W=-nRTlnv2/v1 is used for a much more nuanced system, in which the external pressure is not constant but is instead subject to very, very small fluctuations. Think of it as a piston inside a larger, sealed container. The reason this expansion is called "reversible" is that any change in the external pressure will be counteracted and "reversed": for example, a decrease in the pressure outside of the piston will cause the volume of the gas in the piston to expand, thereby increasing the pressure outside the piston and pushing the gas back down. All of this happens in very small increments. And it is isothermal, so it remains the same temperature the entire time. Hope this makes sense.


Return to “Calculating Work of Expansion”

Who is online

Users browsing this forum: No registered users and 1 guest