HW 1.15

Moderators: Chem_Mod, Chem_Admin

Sunjum Singh 1I
Posts: 30
Joined: Fri Apr 06, 2018 11:05 am

HW 1.15

Postby Sunjum Singh 1I » Mon Apr 16, 2018 9:41 pm

For number 15 when finding the energy levels why do you assume when subtracting N1 from N2 that N1 is 1?

Posts: 31
Joined: Fri Apr 06, 2018 11:05 am

Re: HW 1.15

Postby princessturner1G » Mon Apr 16, 2018 10:05 pm

I think n=1 because in the problem it states that it is in the ultraviolet spectrum. We learned that for the ultraviolet region that corresponds to the Lyman series. The Lyman series is from higher energy levels to the n=1 level. This is how we would know n is one.

Posts: 39
Joined: Fri Apr 06, 2018 11:05 am

Re: HW 1.15

Postby NatalieSDis1A » Mon Apr 16, 2018 10:15 pm

The book does say that the Lyman series is defined by n1 = 1but why is that? Couldn't we still be in the Lyman series and start at, for instance, n =2 and go to n = 3?

Luis Avalos 1D
Posts: 30
Joined: Wed Nov 22, 2017 3:00 am

Re: HW 1.15

Postby Luis Avalos 1D » Mon Apr 16, 2018 11:09 pm

Because the wavelength 102.6 nm corresponds to the lyman series, we know that the energy level, n1, will be at the ground state (n=1).

Posts: 18400
Joined: Thu Aug 04, 2011 1:53 pm
Has upvoted: 435 times

Re: HW 1.15

Postby Chem_Mod » Wed Apr 18, 2018 3:36 pm

The Lyman series is all wavelengths that arise from transitions involving n = 1 as the lower energy level (n1=1 and n2=2,n1=1 and n2=3, n1=1 and n2=4, etc). A 2 to 3 transition corresponds to a wavelength in the Balmer series.

If you didn't remember that the Lyman series involved n = 1, you could guess and check for this problem. There is only one set of two whole numbers that satisfy the equation (and n = 1 is one of them).

Return to “Properties of Light”

Who is online

Users browsing this forum: No registered users and 1 guest