## Determining the cathode/anode

Samuel G Rivera - Discussion 4I
Posts: 61
Joined: Sat Aug 17, 2019 12:16 am
Been upvoted: 1 time

### Determining the cathode/anode

How would you determine the cathode or anode of a cell by only knowing the E value of the half reactions (assuming the you don't know which electrode is being oxidized or which is being reduced)?

205405339
Posts: 77
Joined: Thu Jul 11, 2019 12:16 am

### Re: Determining the cathode/anode

the anode is the one with the most negative potential

Brandi 2C
Posts: 52
Joined: Thu Feb 28, 2019 12:15 am

### Re: Determining the cathode/anode

You can use the equation Ecell = Eright - Eleft to deduce the cathode and anode. Eright would be the cathode and Eleft would be the anode.

Janet Nguy 2C
Posts: 115
Joined: Sat Aug 24, 2019 12:17 am

### Re: Determining the cathode/anode

The total Ecell should always be positive (unless the cell was powered by some non-spontaneous energy source). So if you have the standard E values for the half reactions (both in reduction form) you should flip the one that makes the total Ecell the most positive. The flipped half reaction is the oxidation reaction and it would occur at the anode.

Jasmine Kim 1L
Posts: 71
Joined: Fri Aug 02, 2019 12:16 am

### Re: Determining the cathode/anode

Since the half reactions are usually given to us as reductions, the standard potential of the cathode should be greater than the anode.
This is because is the standard potential of the half reaction. The greater it is, the more likely it is that the reaction will occur. We are always given reduction half reactions, and we know that reduction occurs at the cathode. Therefore, the reaction with the highest potential occurs at the cathode.
If the half reactions are oxidation reactions, then E represents the oxidation potential and the reaction with the greater number occurs at the anode.

Posts: 103
Joined: Sat Aug 17, 2019 12:18 am

### Re: Determining the cathode/anode

The more negative cell potential has the most powerful reducing power and is therefore the anode.

Posts: 125
Joined: Sat Aug 17, 2019 12:17 am

### Re: Determining the cathode/anode

Samuel G Rivera - Discussion 4I wrote:How would you determine the cathode or anode of a cell by only knowing the E value of the half reactions (assuming the you don't know which electrode is being oxidized or which is being reduced)?

To determine which is the anode, and which is the cathode, you look at the standard reaction potentials and whichever is most positive, that is the cathode; the other is the anode. In a concentration cell, the larger concentration is the cathode.

faithkim1L
Posts: 105
Joined: Fri Aug 09, 2019 12:17 am

### Re: Determining the cathode/anode

Use Ecell = Ecathode - Eanode... in a galvanic cell, make sure that Ecell is positive, so the cathode needs to be more positive and the anode more negative.

Posts: 107
Joined: Sat Aug 17, 2019 12:16 am
Been upvoted: 1 time

### Re: Determining the cathode/anode

The most negatively reduced standard cell potential occurs at the cathode and the most positive standard cell potential occurs at the anode.

kausalya_1k
Posts: 50
Joined: Wed Nov 14, 2018 12:23 am

### Re: Determining the cathode/anode

the anode is the more negative cell potential and the cathode is the more positive one