6 posts • Page 1 of 1
I believe the only difference between the two of these equations is that one uses the natural log and the other uses log base 10. I would just be careful to use the constants we discovered in class when interchanging between these two equations, but other than that they are the same.
For the log equation you use it at standard conditions (25 degrees celsius) and the lnQ equation can be used in any situations. My personal preference is the lnQ equation since you can still get the same answer as the log one and don't have to worry about knowing when to apply it.
You can use either but keep in mind that 2.303logx=lnx which is why we see two forms of the Nernst equation for standard conditions. There is E=E°-(0.05916V/n)logQ as you mentioned and E=E°-(0.025693V/n)lnQ that uses the natural log instead.
vanessas0123 wrote:When would you use E=E°-(RT/nF)lnQ vs E=E°-(0.05916V/n)logQ ?
Also, I understand that you can substitute RT/F for 0.025963 for the ln equation when its under standard condition - 25 degree celsius. Is this correct?
Yes, also I use the log one when dealing with H+ or OH- concentration; however, both can be used as long as you use the correct constants for the equation
Who is online
Users browsing this forum: No registered users and 1 guest