Purpose of the Equation
Moderators: Chem_Mod, Chem_Admin
-
- Posts: 100
- Joined: Sat Aug 17, 2019 12:17 am
Purpose of the Equation
So after hearing both a lecture and a discussion section about this equation, I am still incredibly confused as to what its purpose/use is. What is the purpose of this equation?
-
- Posts: 100
- Joined: Sat Aug 17, 2019 12:15 am
Re: Purpose of the Equation
The equation is based on the idea that the exact speed of a particle and the exact position of a particle cannot be known exactly at the same time. However, this equation can be used to determine the uncertainty of one or the other, when the opposite is given.
-
- Posts: 101
- Joined: Sat Aug 17, 2019 12:15 am
Re: Purpose of the Equation
If the position is more precise, the momentum is more uncertain. If the momentum is more precise, the position is more uncertain. The equation calculates this uncertainty.
-
- Posts: 52
- Joined: Sat Aug 24, 2019 12:17 am
-
- Posts: 51
- Joined: Sat Sep 14, 2019 12:15 am
- Been upvoted: 1 time
Re: Purpose of the Equation
Yes! The uncertainty of momentum and the uncertainty of position are indirectly proportional. If you change the equation, you will see that:
p >= h/(4pi *x)
You can see that p is proportional to 1/x. So if p goes up, then x needs to go down and vice versa.
p >= h/(4pi *x)
You can see that p is proportional to 1/x. So if p goes up, then x needs to go down and vice versa.
-
- Posts: 101
- Joined: Sat Jul 20, 2019 12:15 am
Re: Purpose of the Equation
The more you know about the velocity, the less you know about the speed, and vice versa. The reason for this according to Dr. Lavelle is that the process of observing either one of those influences the other. If you set up more sensors to get accurate velocities, you will move the electron off course and change its position. If you want to have a more precise position, you have very few values to calculate a correct velocity.
-
- Posts: 102
- Joined: Thu Jul 11, 2019 12:15 am
Re: Purpose of the Equation
If one property is known, the other cannot be known simultaneously. For example, if one knows the position of an electron, it is impossible to simultaneously know the momentum.
-
- Posts: 110
- Joined: Sat Jul 20, 2019 12:16 am
Re: Purpose of the Equation
This equation shows the inverse relationship of the uncertainty of momentum and position, therefore proving that it is impossible to be certain of both values at the same time. Essentially, the more precise the momentum is, the less precise position is and vice versa.
-
- Posts: 58
- Joined: Thu Jul 25, 2019 12:15 am
Re: Purpose of the Equation
Drew Myers 3A wrote:So after hearing both a lecture and a discussion section about this equation, I am still incredibly confused as to what its purpose/use is. What is the purpose of this equation?
The purpose of the equation is to quantify the fact that when more is known about position, less is known about speed, and vice versa. The equation quantifies the exact uncertainty of one variable in relationship to the known uncertainty of the other variable (often given in the question).
Re: Purpose of the Equation
This is very helpful! Thank you!
And this is the same equation that Dr. Lavelle talked about how the velocity does not matter as much as the mass because when things are super small the differences in velocity don't make much of a difference?
(Sorry if that was worded very poorly!)
And this is the same equation that Dr. Lavelle talked about how the velocity does not matter as much as the mass because when things are super small the differences in velocity don't make much of a difference?
(Sorry if that was worded very poorly!)
Return to “Heisenberg Indeterminacy (Uncertainty) Equation”
Who is online
Users browsing this forum: No registered users and 5 guests