Measure of uncertainty?
Moderators: Chem_Mod, Chem_Admin
Measure of uncertainty?
I thought it was 2*error, however some of the textbook practice problems seem to be using the error itself. Any help would be appreciated!
-
- Posts: 104
- Joined: Fri Sep 24, 2021 6:46 am
Re: Measure of uncertainty?
When for instance, they have that v = 10 +- 2 m/s, since the range of v could be from 8-12 m/s, the ∆v would be 4 m/s (or 2*error). If they say that the uncertainty is 2m/s, ∆v = 2 m/s. For one problem in the textbook, the answer key is wrong and they should be using 2*error.
-
- Posts: 109
- Joined: Fri Sep 24, 2021 5:07 am
- Been upvoted: 1 time
Re: Measure of uncertainty?
If they give an uncertainty and it has the ± symbol, (for example, ∆x = 40±4 m) then you should multiply it by two cause it gives you a range for the error; it can go rom 36-44. However, if they give you an uncertainty, and it's just something like ∆x = 8m, don't multiply it by two.
-
- Posts: 102
- Joined: Fri Sep 24, 2021 7:32 am
Re: Measure of uncertainty?
think of it as the values within the plus or minus given use that as your uncertainty
-
- Posts: 49
- Joined: Fri Sep 24, 2021 6:46 am
Re: Measure of uncertainty?
Hi Ryan, some problems will straightforward give you the uncertainty, such as atomic diameter, so you would just use this given value as your uncertainty in position. Other cases you will be given atomic radius, in which you will have to multiply by 2 because the atomic diameter will give us the complete uncertainty in position. Or they will give you something like x±Δx, which in this case, you would just use Δx. Hope this helps!
Return to “Heisenberg Indeterminacy (Uncertainty) Equation”
Who is online
Users browsing this forum: No registered users and 3 guests