Percision and Accuracy

Moderators: Chem_Mod, Chem_Admin

Posts: 30
Joined: Fri Sep 28, 2018 12:23 am

Percision and Accuracy

Postby Sana_Mian_3G » Thu Oct 04, 2018 10:21 pm

I was wondering if someone could give an example of precision and accuracy related to chemistry/lab.

Posts: 18891
Joined: Thu Aug 04, 2011 1:53 pm
Has upvoted: 716 times

Re: Percision and Accuracy

Postby Chem_Mod » Thu Oct 04, 2018 10:25 pm

Think about performing an experiment where you have to measure volumes in a graduated cylinder. If we had to measure 5mL several times, then precision would be having all of your measurements around the same volume. Perhaps all your measurements were around 5.3mL. It's not accurate because the measurement wasn't 5mL, but it is precise since all the measurements are close together. Accuracy would be measuring 5mL, 5.1mL, and 4.9mL. It's not precise since the measurements aren't too similar, but it's accurate since they are close to 5mL.

Samantha Kwock 1D
Posts: 61
Joined: Fri Sep 28, 2018 12:24 am

Re: Percision and Accuracy

Postby Samantha Kwock 1D » Thu Oct 04, 2018 10:35 pm

This is similar to what was said in class. Imagine you are running three trials of an experiment that require you to measure out a certain number of grams of an element. The balance that you use could give measurements numerically close to each other all three times. If this is the case, then the balance is precise. However, just because this balance gives precise measurements, does not necessarily mean that the measurements are accurate. The balance could be zeroed out inaccurately and the actual weight of the sample could be heavier or lighter than what the balance reads. However, if the balance is precise, all three measurements of the sample would be off by the same number.

Harshita Talkad 4L
Posts: 60
Joined: Fri Sep 28, 2018 12:16 am

Re: Percision and Accuracy

Postby Harshita Talkad 4L » Sat Oct 06, 2018 9:06 pm

Another example is if you are measuring the temperature of a substance and consistently get 39 degrees Celsius during 5 separate trials, but the substance is actually 35 degrees Celsius. This would mean that the measurements are precise, since you repeatedly get the same result, but they are not accurate because they are not the correct value.

Posts: 56
Joined: Fri Sep 28, 2018 12:25 am

Re: Percision and Accuracy

Postby monikac4k » Sun Oct 07, 2018 3:34 pm

Another example would be a titration lab. If you were to repeat the titration lab and continued to use about the same volume of the titrant in order to activate the indicator for each trial, then your lab would have a precise set of trials. However, your lab trials would only be accurate if the standardized answers (the actual pH values) are close to the actual pH value of the analyte.

Posts: 60
Joined: Fri Sep 28, 2018 12:26 am

Re: Percision and Accuracy

Postby Anmol_cheema_2F » Sun Oct 07, 2018 4:39 pm

If you were trying to pour exactly 5 mL of water in a beaker and the first three times you poured 5, 5.1, and 4.9, then your accuracy and precision is pretty high because it's close to 5 and the numbers are close together. Precision is related to repeatability so if the next three times you poured 5.6, 5.6, and 5.7, then although your measurements are not accurate they are precise because they are in the same range.

Return to “Accuracy, Precision, Mole, Other Definitions”

Who is online

Users browsing this forum: No registered users and 1 guest