Partial Pressure

Moderators: Chem_Mod, Chem_Admin

205389184
Posts: 100
Joined: Sat Sep 07, 2019 12:18 am

Partial Pressure

Postby 205389184 » Sun Jan 12, 2020 8:59 pm

When calculating for the reaction quotient, will the partial pressure be given in a problem or do we have to solve for it?

Shimei_2F
Posts: 100
Joined: Fri Aug 09, 2019 12:17 am

Re: Partial Pressure

Postby Shimei_2F » Sun Jan 12, 2020 9:00 pm

It should be given usually.

RasikaObla_4I
Posts: 100
Joined: Thu Jul 25, 2019 12:15 am

Re: Partial Pressure

Postby RasikaObla_4I » Sun Jan 12, 2020 9:00 pm

Usually they should be given or you might have to convert from moles to pressure using the ideal gas equation.

Anokhi Patel 2B
Posts: 76
Joined: Fri Aug 09, 2019 12:17 am

Re: Partial Pressure

Postby Anokhi Patel 2B » Sun Jan 12, 2020 9:04 pm

At least one quantity should be given in the problem, in order to solve for the rest of reactant and product pressures.

Alison Trinh 1E
Posts: 104
Joined: Thu Jul 25, 2019 12:16 am

Re: Partial Pressure

Postby Alison Trinh 1E » Sun Jan 12, 2020 10:02 pm

What exactly is partial pressure and how does it relate to chemical equilibrium?

ASetlur_1G
Posts: 101
Joined: Fri Aug 09, 2019 12:17 am

Re: Partial Pressure

Postby ASetlur_1G » Sun Jan 12, 2020 10:13 pm

^ Partial pressure is the amount of pressure each gas would exert if it were the only gas in the volume. We express the amount of a gas at equilibrium in terms of its partial pressure.

Nathan Rothschild_2D
Posts: 131
Joined: Fri Aug 02, 2019 12:15 am

Re: Partial Pressure

Postby Nathan Rothschild_2D » Sun Jan 12, 2020 10:17 pm

Will the partial pressure of the gases always add to the same thing on both sides of the reaction?

Angela Wu-2H
Posts: 50
Joined: Fri Aug 30, 2019 12:16 am

Re: Partial Pressure

Postby Angela Wu-2H » Sun Jan 12, 2020 11:55 pm

Can partial pressure be measured in bars and atm or just bars?

alicechien_4F
Posts: 104
Joined: Sat Jul 20, 2019 12:15 am

Re: Partial Pressure

Postby alicechien_4F » Mon Jan 13, 2020 7:08 pm

Angela Wu-2H wrote:Can partial pressure be measured in bars and atm or just bars?


Partial pressure can be measure in both bars and atm. I believe for this class, we will assume 1 bar = 1 atm, but you can also convert if necessary.

Caroline Zepecki
Posts: 101
Joined: Fri Aug 09, 2019 12:16 am

Re: Partial Pressure

Postby Caroline Zepecki » Wed Jan 15, 2020 1:33 pm

You most likely should be given the partial pressure to complete a problem where you're either solving for Qp or Kp.

Bella Townsend
Posts: 50
Joined: Wed Feb 20, 2019 12:18 am

Re: Partial Pressure

Postby Bella Townsend » Fri Jan 17, 2020 1:29 pm

I'm confused on the meaning on Kc and the difference between Kc and K with other subscripts.

gabbymaraziti
Posts: 111
Joined: Wed Sep 18, 2019 12:19 am

Re: Partial Pressure

Postby gabbymaraziti » Fri Jan 17, 2020 3:17 pm

How can we convert between atm and bars? The examples in the book show that the conversion is not 1:1.

Emma Joy Schaetz 1E
Posts: 43
Joined: Wed Sep 18, 2019 12:16 am

Re: Partial Pressure

Postby Emma Joy Schaetz 1E » Sat Jan 18, 2020 11:48 am

How do we know when to use K_c and when to use Partial Pressure Notation?

Emma Joy Schaetz 1E
Posts: 43
Joined: Wed Sep 18, 2019 12:16 am

Re: Partial Pressure

Postby Emma Joy Schaetz 1E » Sat Jan 18, 2020 11:49 am

Why are solids and liquids not included when calculating K values?

Emma Joy Schaetz 1E
Posts: 43
Joined: Wed Sep 18, 2019 12:16 am

Re: Partial Pressure

Postby Emma Joy Schaetz 1E » Sat Jan 18, 2020 11:50 am

905289082 wrote:You most likely should be given the partial pressure to complete a problem where you're either solving for Qp or Kp.

What is the difference between Kc and Kp?

605395381
Posts: 50
Joined: Mon Jun 17, 2019 7:24 am

Re: Partial Pressure

Postby 605395381 » Sat Jan 18, 2020 12:28 pm

Partial pressure (from what I have seen) is usually given in the problem. But I do not doubt that we might have to solve for Partial Pressure in some cases.

CMaduno_1L
Posts: 102
Joined: Wed Sep 18, 2019 12:18 am

Re: Partial Pressure

Postby CMaduno_1L » Sat Jan 18, 2020 2:34 pm

In regards to what the difference is between Kc and Kp:

Kc represents the equilibrium concentrations of reactants and products, while Kp suggests the equilibrium partial pressures of the reactants and products

CMaduno_1L
Posts: 102
Joined: Wed Sep 18, 2019 12:18 am

Re: Partial Pressure

Postby CMaduno_1L » Sat Jan 18, 2020 2:39 pm

Emma Joy Schaetz 1E wrote:Why are solids and liquids not included when calculating K values?


I believe solids and liquids are not included when calculating K values because their concentrations don't change significantly over the course of a reaction. Can anyone confirm this? I'm not exactly sure if this is the right explanation.

CMaduno_1L
Posts: 102
Joined: Wed Sep 18, 2019 12:18 am

Re: Partial Pressure

Postby CMaduno_1L » Sat Jan 18, 2020 2:44 pm

Emma Joy Schaetz 1E wrote:How do we know when to use K_c and when to use Partial Pressure Notation?

Kc notation is used when the reactants and products of a homogeneous reaction are in the aqueous phase, while partial pressure notation is used when the reactants and products of a homogeneous reaction are in the gas phase.
Kc = use brackets
Kp = use parentheses

Michelle Xie 2B
Posts: 99
Joined: Sat Aug 17, 2019 12:18 am

Re: Partial Pressure

Postby Michelle Xie 2B » Sat Jan 18, 2020 5:49 pm

Usually, it will be given.


Return to “Non-Equilibrium Conditions & The Reaction Quotient”

Who is online

Users browsing this forum: No registered users and 2 guests