Partial Pressure changes
Moderators: Chem_Mod, Chem_Admin
-
- Posts: 102
- Joined: Fri Sep 24, 2021 7:04 am
- Been upvoted: 1 time
Partial Pressure changes
If the partial pressure of a gas increased by a specific amount, do we assume that the other reactant in the same side of the gas also increased by the same amount? Just like how in an ice table the value x stays the same and so the increase in partial pressure would be just like x and the other compound will also increase by x if they are on the same side of the reaction?
-
- Posts: 100
- Joined: Fri Sep 24, 2021 5:16 am
- Been upvoted: 1 time
Re: Partial Pressure changes
Hi! From my understanding, as long as there is a 1:1 molar ratio between the two reactants, it would increase by the same amount X. Otherwise, I think that you would multiply a constant in front of the X based on the molar ratio values. I hope that helps!
-
- Posts: 100
- Joined: Fri Sep 24, 2021 7:36 am
Re: Partial Pressure changes
I agree with the previous post, as long as there is a 1:1 molar ratio between the two reactants it should increase by the same amount X.
Re: Partial Pressure changes
Yeah I agree. Partial pressure should change in similar ways to concentration for a given reaction. Since you can convert a partial pressure to a concentration, it wouldn't make sense for the partial pressures to change in a different way than the concentrations over the course of a reaction.
-
- Posts: 107
- Joined: Fri Sep 24, 2021 5:14 am
- Been upvoted: 6 times
Re: Partial Pressure changes
Irene,
Partial pressures are simply a description of the pressure in a system attributed to a particular gaseous species. Increasing the partial pressure of one reactant species (presumably through increasing quantity) has no bearing on the other reactant partial pressure initially. Once equilibrium is reestablished, you need to analyze the ICE table to determine final partial pressures.
Partial pressures are simply a description of the pressure in a system attributed to a particular gaseous species. Increasing the partial pressure of one reactant species (presumably through increasing quantity) has no bearing on the other reactant partial pressure initially. Once equilibrium is reestablished, you need to analyze the ICE table to determine final partial pressures.
Re: Partial Pressure changes
Hi!
if the molar ratio between the reactants is 1 to 1, you can assume it would increase by X for both. if it is not the same ratio, multiply x by its multiplier and you will get the correct answer.
Hope this helps!
if the molar ratio between the reactants is 1 to 1, you can assume it would increase by X for both. if it is not the same ratio, multiply x by its multiplier and you will get the correct answer.
Hope this helps!
-
- Posts: 104
- Joined: Fri Sep 24, 2021 7:30 am
Re: Partial Pressure changes
Yes, if you have two gasses on the same side of a reaction equation and one increases in partial pressure, assume that the other also increases at the according molar ratio
-
- Posts: 102
- Joined: Fri Sep 24, 2021 5:26 am
-
- Posts: 130
- Joined: Fri Sep 24, 2021 6:18 am
Re: Partial Pressure changes
It typically depends on the molar ratio so it should increase by the same amount.
-
- Posts: 51
- Joined: Wed Feb 20, 2019 12:18 am
Re: Partial Pressure changes
Depends on the molar ratio. Reactants with 1:1 ratio should increase by the same amount.
Return to “Non-Equilibrium Conditions & The Reaction Quotient”
Who is online
Users browsing this forum: No registered users and 3 guests