Achieve Wk 2 Question 3

Moderators: Chem_Mod, Chem_Admin

Tiffany Ngan 1K
Posts: 34
Joined: Mon Jan 09, 2023 8:38 am

Achieve Wk 2 Question 3

Postby Tiffany Ngan 1K » Fri Jan 27, 2023 2:40 am

For question number 3 on week two of Achieve, I obtained an ionization percentage of 9.39% which is over 5%. Therefore, I approached the questions without omitting the -x in solving for x. However, when solving for x using the quadratic equation, I obtained an answer on the calculation deemed a "Non-real answer." Does anyone have any suggestions on how else to approach this problem? I've attached my work below.
Attachments
IMG_0052.jpg

Alyssa Cheung 3I
Posts: 50
Joined: Mon Jan 09, 2023 10:11 am

Re: Achieve Wk 2 Question 3

Postby Alyssa Cheung 3I » Fri Jan 27, 2023 3:18 am

I believe you forgot the negative sign in front of the x^2 of your quadratic.

Nolan Reber 3F
Posts: 31
Joined: Mon Jan 09, 2023 10:03 am

Re: Achieve Wk 2 Question 3

Postby Nolan Reber 3F » Fri Jan 27, 2023 10:38 am

Yes, when solving for the quadratic formula, ensure all signs (+/-) of your quadratic are correct, so that the quadratic is able to be calculated properly. Also, be sure to calculate BOTH outcomes of the quadratic equation (-b plus/minus sqrt) to make sure you didn’t miss a correct value.

Camilla Hinrichsen 1A
Posts: 36
Joined: Mon Jan 09, 2023 2:19 am

Re: Achieve Wk 2 Question 3

Postby Camilla Hinrichsen 1A » Fri Jan 27, 2023 6:09 pm

Make sure to use the correct quadratic formula x=(-b +/- sqrt(b^2 -4(a)(c)))/2(a) when solving your equation, as I believe you forgot the negative sign that goes in front of the very first "b". It's a very easy mistake to make! If you do this you should be able to get the right answer.

Kevin Briceno 3L
Posts: 34
Joined: Mon Jan 09, 2023 10:15 am

Re: Achieve Wk 2 Question 3

Postby Kevin Briceno 3L » Sun Jan 29, 2023 9:50 pm

Be careful when forming the quadratic formula. I also wasn't paying attention to the signs of the values for this question, so I spent a good time trying to see what I did wrong. There should be a negative sign before your x^2 or there should be opposite signs for the other two values.


Return to “Non-Equilibrium Conditions & The Reaction Quotient”

Who is online

Users browsing this forum: No registered users and 4 guests