Page 1 of 1

ICE

Posted: Sun Jan 27, 2019 5:07 pm
by Claudeth Martinez 1D
what does E stand for again in an ICE box?

Re: ICE

Posted: Sun Jan 27, 2019 5:09 pm
by Sara Flynn 2C
equilibrium concentration

Re: ICE

Posted: Sun Jan 27, 2019 5:54 pm
by Henry_Phan_4L
Concentration at equilibrium, so you basically add I and C to get the expected concentration at eq

Re: ICE

Posted: Sun Jan 27, 2019 6:02 pm
by Yvonne Du
The concentration of reactants and products(excluded solids and liquids) in the equilibrium state.

Re: ICE

Posted: Sun Jan 27, 2019 8:24 pm
by uhedlund
In the ICE box, I stands for initial (so initial concentrations), C stands for Change, and E stands for Equilibrium.

Re: ICE

Posted: Sun Jan 27, 2019 8:32 pm
by Aiden Atoori 1C
E stands for equilibrium concentration.

Re: ICE

Posted: Sun Jan 27, 2019 9:01 pm
by Jaqueline Monreal 2L
concentration at equilibrium

Re: ICE

Posted: Sun Jan 27, 2019 10:17 pm
by Diana Sandoval 1K
concentration at equilibrium. You can figure that out by adding I and C.

Re: ICE

Posted: Tue Jan 29, 2019 4:07 pm
by inlovewithchemistry
The E is the final step in an ice chart. It adds up the I and C steps and it is what you will put into an equation to get your x value when given K.

Re: ICE

Posted: Wed Jan 30, 2019 7:45 pm
by Nina Do 4L
I = initial
C = change in concentration
E = equilibrium, so finding E will give you the concentration of the compound at equilibrium.

Re: ICE

Posted: Wed Jan 30, 2019 7:49 pm
by LedaKnowles2E
Initial concentration/pressure, Change in concentration/pressure, Equilibrium concentration/pressure

Re: ICE

Posted: Wed Jan 30, 2019 10:37 pm
by Krista Mercado 1B
E stands for equilibrium concentration.

Re: ICE

Posted: Sun Feb 03, 2019 11:05 pm
by NatBrown1I
I is for the initial concentration
C is for the change in concentration
E is for the equilibrium concentration (essentially the I plus/minus the C)

Re: ICE

Posted: Wed Feb 06, 2019 9:26 am
by Ricardo Martin 1J
E stands for equilibrium concentration.

Re: ICE

Posted: Sun Feb 10, 2019 4:22 pm
by Brianna Brockman 1F
E stands for equilibrium

Re: ICE

Posted: Thu Mar 07, 2019 12:02 am
by Alysa Rallistan 2G
E is the concentration of Reactants and Products at Equilibrium, after the Change

Re: ICE

Posted: Thu Mar 07, 2019 12:02 am
by Alysa Rallistan 2G
E is the concentration of Reactants and Products at Equilibrium, after the Change

Re: ICE

Posted: Mon Mar 11, 2019 5:22 pm
by David Sarkissian 1K
E is what you are always looking to find, as it stands for Equilibrium concentration. So that line will tell you the concentrations of both your reactants and products individually as their reach their most stable state at equilibrium.

Re: ICE

Posted: Tue Mar 12, 2019 1:11 pm
by Pritish Patil 1K
E stands for the equilibrium concentration of the reactants and products.

Re: ICE

Posted: Thu Mar 14, 2019 4:38 am
by Jacqueline Duong 1H
E is the equilibrium concentration