Heating curve

Moderators: Chem_Mod, Chem_Admin

Althea Zhao 1B
Posts: 101
Joined: Mon Jun 17, 2019 7:24 am

Heating curve

Postby Althea Zhao 1B » Wed Feb 12, 2020 3:29 pm

How is the formula for enthalpy with a change in temperature along a heating curve different from the formula for enthalpy at temperature plateaus?

Posts: 127
Joined: Sat Aug 17, 2019 12:18 am
Been upvoted: 2 times

Re: Heating curve

Postby KaleenaJezycki_1I » Wed Feb 12, 2020 3:34 pm

For the sloped lines in a heating curve ( the solid, or liquid is heating up) for the straight horizontal lines the phase change is occurring. When calculating the sloped lines you use q=mCDeltaT but when you are at a phase change ( straight line), you use n*DeltaHfusion

Juliana Chopelas 1A
Posts: 50
Joined: Sat Aug 24, 2019 12:16 am

Re: Heating curve

Postby Juliana Chopelas 1A » Sun Feb 16, 2020 3:11 pm

When a phase change is happening you will use q=mdeltah or q=ndeltah depending on whether you are given mass or moles. When the substance is heating up or the diagonal line on the curve, you will used q=mcdeltaT or q=ncdeltaT once again depending on whether you are given moles or mass.

Charysa Santos 4G
Posts: 107
Joined: Wed Sep 18, 2019 12:21 am

Re: Heating curve

Postby Charysa Santos 4G » Sun Feb 16, 2020 3:37 pm

Phase changes correlate to the plateau of a heating curve, and there, you can use q = mΔh if you are given mass or q = nΔh if you are given moles. If you are calculating the diagonal/rise in temperature, you will use q = mCΔT or q = nCΔT.

Posts: 101
Joined: Wed Sep 18, 2019 12:20 am

Re: Heating curve

Postby Kennedi2J » Sun Feb 16, 2020 7:13 pm

There technically is no temperature change at the plateaus where phase changes occur (i.e. melting is 0 degrees---> 0 degrees). For phase changes you use q=m(delta H) and for a temperature change you use q= mCAT.

Posts: 36
Joined: Tue Feb 26, 2019 12:15 am

Re: Heating curve

Postby Alondra » Sun Feb 16, 2020 10:09 pm

Phase changes --> use q=m(delta H)

Temperature change --> use q= mCAT
Heating Curve.png
Heating Curve.png (5.76 KiB) Viewed 147 times

Return to “Phase Changes & Related Calculations”

Who is online

Users browsing this forum: No registered users and 4 guests