work equations

Moderators: Chem_Mod, Chem_Admin

Savannah Mance 4G
Posts: 107
Joined: Fri Aug 30, 2019 12:17 am

work equations

Postby Savannah Mance 4G » Wed Jan 29, 2020 10:10 am

For the work formula for expansion it is - P x change of volume but for the other formula it has P x a x d. I was just wondering why the second equation doesn't have a negative sign in it.

Chem_Mod
Posts: 18400
Joined: Thu Aug 04, 2011 1:53 pm
Has upvoted: 435 times

Re: work equations

Postby Chem_Mod » Wed Jan 29, 2020 2:23 pm

They both can if one is using both to define the work done by/on the system.

Tyler Angtuaco 1G
Posts: 130
Joined: Wed Sep 11, 2019 12:16 am

Re: work equations

Postby Tyler Angtuaco 1G » Wed Jan 29, 2020 4:59 pm

The second equation is likely referring to the work done on the system, which is why it is positive. The first one you mention is what will be used most for the problems in the thermodynamics section since our observations are typically made in reference to the system and the work it is doing.

Angela Patel 2J
Posts: 110
Joined: Sat Aug 24, 2019 12:17 am

Re: work equations

Postby Angela Patel 2J » Wed Jan 29, 2020 5:03 pm

What about when we are calculating the change in internal energy in a system under constant pressure? Work is involved, do we always use the negative sign in the expression for work?

Abhi Vempati 2H
Posts: 104
Joined: Fri Aug 09, 2019 12:17 am

Re: work equations

Postby Abhi Vempati 2H » Mon Feb 03, 2020 10:20 am

Angela Patel 2J wrote:What about when we are calculating the change in internal energy in a system under constant pressure? Work is involved, do we always use the negative sign in the expression for work?


We don't just put the negative sign because work is involved; rather, we add the negative sign because the system is doing work. If work was being done on the system, the sign would be positive, signifying that you need to look at whether the system is doing work or if work is being done on the system. Hope this helps!

Dina Marchenko 2J
Posts: 54
Joined: Thu Jul 25, 2019 12:16 am

Re: work equations

Postby Dina Marchenko 2J » Mon Feb 03, 2020 12:50 pm

Angela Patel 2J wrote:What about when we are calculating the change in internal energy in a system under constant pressure? Work is involved, do we always use the negative sign in the expression for work?


You don't necessarily need to worry about when to include the negative sign or not within -P delta V. If work is being done on the system then the system is gaining work and energy. Work being done on the system is compression which means the volume will decrease. That will make delta V negative which will cancel out the negative sign and make internal energy positive overall. So the negative sign is there to represent a system losing energy when it does work on the surroundings, but the values you input into that same equation with work being done on a system will rework the negative sign and give the positive value you'd expect.

So don't worry about the negative sign. It's just there to make sure the internal energy value properly represents what's occurring with the system.


Return to “Reaction Enthalpies (e.g., Using Hess’s Law, Bond Enthalpies, Standard Enthalpies of Formation)”

Who is online

Users browsing this forum: No registered users and 2 guests