q=mCdeltaT

Moderators: Chem_Mod, Chem_Admin

Valeria Viera 1B
Posts: 60
Joined: Fri Apr 06, 2018 11:05 am

q=mCdeltaT

Postby Valeria Viera 1B » Sun Feb 10, 2019 11:10 pm

I’ve seen this equation written as q=nCdeltaT and q=mCdeltaT
Should we use moles or grams for this equation on the test?

Celeste 1I
Posts: 44
Joined: Fri Sep 28, 2018 12:18 am

Re: q=mCdeltaT

Postby Celeste 1I » Sun Feb 10, 2019 11:12 pm

Use the one that is easiest to use, I'm assuming. If they give you grams then use m and if they give you mols use n. Just make sure to then use the corresponding C. Write out your units to ensure you're getting the right answer and everything cancels out.

mahika_nayak_3L
Posts: 60
Joined: Fri Sep 28, 2018 12:26 am

Re: q=mCdeltaT

Postby mahika_nayak_3L » Sun Feb 10, 2019 11:19 pm

Use either m or n depending on the units of the specific heat, C, that is given to you. That way your units can be consistent with one another and cancel out to give you a q value in terms of Joules.

MichelleRamirez_2F
Posts: 63
Joined: Fri Sep 28, 2018 12:28 am

Re: q=mCdeltaT

Postby MichelleRamirez_2F » Tue Feb 12, 2019 2:29 pm

If you are given moles then use n and molar heat capacity, nad if you are given mass (g) then use m and specific heat capacity of the substance.

IsabelLight2H
Posts: 34
Joined: Wed Oct 03, 2018 12:15 am

Re: q=mCdeltaT

Postby IsabelLight2H » Tue Feb 12, 2019 3:32 pm

I would just make sure your final answer is in the units they ask for! Don't give moles if they ask for mass and vice versa!

Xingzheng Sun 2K
Posts: 62
Joined: Fri Sep 28, 2018 12:29 am

Re: q=mCdeltaT

Postby Xingzheng Sun 2K » Wed Feb 20, 2019 11:33 pm

mC represents the specific heat capacity is measured in per unit of mass; nC means the specific heat capacity is measured per mole.

Hadji Yono-Cruz 2L
Posts: 64
Joined: Fri Sep 28, 2018 12:26 am

Re: q=mCdeltaT

Postby Hadji Yono-Cruz 2L » Sun Feb 24, 2019 1:00 am

Use whichever the question is asking for, but if you are not given the molar heat capacity then convert the moles into grams and use specific heat capacity.

MichaelMoreno2G
Posts: 60
Joined: Fri Sep 28, 2018 12:26 am

Re: q=mCdeltaT

Postby MichaelMoreno2G » Sun Feb 24, 2019 8:38 am

What would be the final units for the equations? In other words, if we used moles, what would our final units be, and if we used m, what would our final units be? I get confused with the two.

varunhariharan
Posts: 30
Joined: Mon Jan 07, 2019 8:16 am

Re: q=mCdeltaT

Postby varunhariharan » Mon Feb 25, 2019 9:58 am

The units either way should be in Joules because the moles/grams unit will be cancelled in the equation by the specific heat capacity.

yuetao4k
Posts: 60
Joined: Fri Sep 28, 2018 12:27 am
Been upvoted: 1 time

Re: q=mCdeltaT

Postby yuetao4k » Fri Mar 15, 2019 6:31 pm

It depends on what units are given in the problem. Use whichever is simplest.

Nghi Nguyen 2L
Posts: 61
Joined: Fri Sep 28, 2018 12:18 am

Re: q=mCdeltaT

Postby Nghi Nguyen 2L » Fri Mar 15, 2019 9:22 pm

i just look at the units for the specific heat, they should tell you to use grams or moles

Heidi Ibarra Castillo 1D
Posts: 60
Joined: Fri Sep 28, 2018 12:19 am

Re: q=mCdeltaT

Postby Heidi Ibarra Castillo 1D » Sat Mar 16, 2019 10:31 pm

I assume if they give you grams you use m, if moles then youd use n.


Return to “Heat Capacities, Calorimeters & Calorimetry Calculations”

Who is online

Users browsing this forum: No registered users and 1 guest