SI Unit for Mass

Moderators: Chem_Mod, Chem_Admin

Molly Posta 1H
Posts: 90
Joined: Wed Sep 30, 2020 10:05 pm
Been upvoted: 1 time

SI Unit for Mass

Postby Molly Posta 1H » Wed Oct 28, 2020 5:16 pm

Out of all the equations we've used so far in units 1 and 2, should mass always be in kg? I've been using g for mass for most of my work, but I noticed while reviewing the De Broglie equation that mass needs to be converted into kg for this example. Do some equations require mass in kg while some use g?

Wil Chai 3D
Posts: 91
Joined: Wed Sep 30, 2020 9:55 pm
Been upvoted: 1 time

Re: SI Unit for Mass

Postby Wil Chai 3D » Wed Oct 28, 2020 5:19 pm

The equations that involve joules as a unit require you to use kg, because 1 J = 1 kg m^2 s^-2 . It's important to note also that all equations with Planck's constant require kg, since h = 6.626x10^-34 J*s.
Last edited by Wil Chai 3D on Wed Oct 28, 2020 5:21 pm, edited 1 time in total.

kateraelDis1L
Posts: 109
Joined: Wed Sep 30, 2020 9:54 pm

Re: SI Unit for Mass

Postby kateraelDis1L » Wed Oct 28, 2020 5:20 pm

Whenever you use DeBroglie, you always want mass in kg. Whether that be the mass of an electron or something else.

Stuti Pradhan 2J
Posts: 159
Joined: Wed Sep 30, 2020 9:32 pm
Been upvoted: 5 times

Re: SI Unit for Mass

Postby Stuti Pradhan 2J » Wed Oct 28, 2020 5:20 pm

Most of the energy equations require kg because Joules = kg⋅m^2⋅s^−2, so you need to use kg to make sure the units cancel. In converting from mass to moles, you just use the molar mass in grams, but otherwise, kg it typically used as it is the SI unit for mass.

Hope this helps!

Nathan Lao 2I
Posts: 88
Joined: Wed Sep 30, 2020 9:40 pm
Been upvoted: 1 time

Re: SI Unit for Mass

Postby Nathan Lao 2I » Wed Oct 28, 2020 5:22 pm

It's probably easier to use kg instead of grams since Planck's constant is given as 6.626x10^/34 kg m^2 s^-1. Cancelling units is pretty easy from there.

Bai Rong Lin 2K
Posts: 91
Joined: Wed Sep 30, 2020 9:54 pm

Re: SI Unit for Mass

Postby Bai Rong Lin 2K » Sun Nov 01, 2020 10:47 pm

Molly Posta 1H wrote:Out of all the equations we've used so far in units 1 and 2, should mass always be in kg? I've been using g for mass for most of my work, but I noticed while reviewing the De Broglie equation that mass needs to be converted into kg for this example. Do some equations require mass in kg while some use g?

It is based on what type of constant you are using and its units I believe, but the majority of the time kg is being used in these constants!

ShinwooKim_3E
Posts: 90
Joined: Wed Sep 30, 2020 10:00 pm

Re: SI Unit for Mass

Postby ShinwooKim_3E » Wed Nov 04, 2020 12:45 am

Molly Posta 1H wrote:Out of all the equations we've used so far in units 1 and 2, should mass always be in kg? I've been using g for mass for most of my work, but I noticed while reviewing the De Broglie equation that mass needs to be converted into kg for this example. Do some equations require mass in kg while some use g?

We should always leave mass in kg when using the De Broglie equation (it's different when talking about stoichiometry or mass measurements of compounds, then we use g)

Kathy_Li_1H
Posts: 90
Joined: Wed Sep 30, 2020 9:31 pm

Re: SI Unit for Mass

Postby Kathy_Li_1H » Sat Nov 07, 2020 5:58 pm

Hi! The SI unit for Mass is kilograms, so I would just assume that the equation uses kilograms unless otherwise stated (e.g. the final units has g instead of kg).

Gicelle Rubin 1E
Posts: 81
Joined: Fri Oct 02, 2020 12:16 am

Re: SI Unit for Mass

Postby Gicelle Rubin 1E » Sat Nov 07, 2020 6:04 pm

Hi! I am pretty sure mass has to be in kg. In examples where I'm given grams, I convert to kg before using any equation.

Heidi Buri 2I
Posts: 50
Joined: Wed Sep 30, 2020 9:57 pm

Re: SI Unit for Mass

Postby Heidi Buri 2I » Sat Dec 12, 2020 11:57 am

Hi! The standard unit of mass (SI unit) is kilograms. I would recommend converting to grams for most equations until it is specifically asking for grams. When converting from kilograms to grams just use that 1 kilogram = 1000 grams.

Dane_Beasley_1E
Posts: 68
Joined: Wed Sep 30, 2020 9:42 pm

Re: SI Unit for Mass

Postby Dane_Beasley_1E » Tue Dec 15, 2020 5:37 pm

Yes, mass should be converted into kg as it is the SI unit.


Return to “SI Units, Unit Conversions”

Who is online

Users browsing this forum: No registered users and 1 guest