Values for Molar Mass
Moderators: Chem_Mod, Chem_Admin
-
- Posts: 104
- Joined: Fri Sep 24, 2021 6:23 am
Values for Molar Mass
Hi! I noticed that sometimes for certain elements different molar masses are used (rounded and not rounded), so I was wondering if it matters which value I use? Thanks so much!
-
- Posts: 101
- Joined: Fri Sep 24, 2021 5:01 am
Re: Values for Molar Mass
I'm not too sure about this, but I think you usually select the values rounding to the hundredth place. Hydrogen would be 1.01, Carbon would be 12.01, Oxygen would be 16.00, Nitrogen would 14.00, and Chlorine would be 35.35.
-
- Posts: 99
- Joined: Fri Sep 24, 2021 6:20 am
Re: Values for Molar Mass
Hi I typically use the data given by the periodic table, as they are the most precise and will lead to a more precise answer later on. However you have to based the values for molar mass off of the significant digits you would like to get.
-
- Posts: 100
- Joined: Fri Sep 24, 2021 5:25 am
Re: Values for Molar Mass
I think you should try to keep as many decimal places for molar masses as possible, but you must consider the amount of significant figures that the problem provides in the beginning. I would try to make it as specific as possible for calculating with molar mass and then adjusting the significant figures at the end.
-
- Posts: 103
- Joined: Fri Sep 24, 2021 6:46 am
Re: Values for Molar Mass
Hi Amy!
I think when given the option you should always use the not rounded molar masses so that you can maintain a certain amount of significant figures/accuracy, but if you need a reliable resource for the periodic table and molar masses, I would suggest just using the one Dr. Lavelle provides on his website. That way your answers should always match up with what he gives.
I think when given the option you should always use the not rounded molar masses so that you can maintain a certain amount of significant figures/accuracy, but if you need a reliable resource for the periodic table and molar masses, I would suggest just using the one Dr. Lavelle provides on his website. That way your answers should always match up with what he gives.
Re: Values for Molar Mass
I usually keep two decimal places after each mass (H=1.01,c=12.01, etc.). That's just how I did it in HS chem and it keeps it precise enough without being ridiculously precise.
-
- Posts: 105
- Joined: Fri Sep 24, 2021 6:21 am
Re: Values for Molar Mass
Just FYI, if you guys are using a scientific calculator, you can store values in it. For example, Avogadro's Constant: You can type 6.022E23 and then hit the STO button and then Alpha[Choose a Letter] and it will store it in that variable for future use. So instead of writing 6.022E23 every time, you can just put A.
-
- Posts: 101
- Joined: Fri Sep 24, 2021 7:04 am
Re: Values for Molar Mass
Hi Amy! I would keep as many digits/significant figures in your molar masses as possible when doing calculations so that your answer is as precise as possible (I typically write out the molar mass to the thousandths place when calculating values). Your answer will typically end up having as many significant figures as the value that they provide to you in the problem, so it does not matter how many sig figs you use in your molar mass, but I would recommend being as precise as possible!
-
- Posts: 109
- Joined: Fri Sep 24, 2021 5:23 am
Re: Values for Molar Mass
I would usually not round the molar masses before doing the problem because that could cause the final answer to be less precise. You could adjust the significant figures at the very end after doing all of the calculations. I have been using the periodic table on Professor Lavelle's website for all of our work.
-
- Posts: 101
- Joined: Fri Sep 24, 2021 5:58 am
- Been upvoted: 1 time
Re: Values for Molar Mass
I would use as many significant digits as you can for as long as possible. You can always round at the end.
-
- Posts: 66
- Joined: Fri Sep 24, 2021 7:24 am
Re: Values for Molar Mass
Hi, I typically go by the number of significant figures given in the problem, but if no numbers are given in the question, I usually round to the hundredths place. Mostly I just try to be consistent with how much I am rounding by.
-
- Posts: 50
- Joined: Fri Sep 24, 2021 7:01 am
Re: Values for Molar Mass
I'd recommend using the most decimal places as you can because I've found that it usually gives me a more accurate answer!
-
- Posts: 135
- Joined: Wed Sep 30, 2020 9:36 pm
Re: Values for Molar Mass
Personally, I try to be consistent with how I round if the problem doesn't give me a specific number (if the problem does, then I just use the exact same number). This usually means I round to the thousandths place for all the numbers that I use.
-
- Posts: 101
- Joined: Fri Sep 24, 2021 5:25 am
Re: Values for Molar Mass
Hi, usually there’s no harm in being as specific and using as many sig figs as your given, you could also match it to the number of sig figs that are used in the problem.
-
- Posts: 92
- Joined: Fri Sep 24, 2021 7:07 am
- Been upvoted: 1 time
Re: Values for Molar Mass
I think for a more accurate answer, use what the periodic table provides directly- unless the question or problem states the molar mass as a rounded number.
-
- Posts: 105
- Joined: Fri Sep 24, 2021 5:56 am
Re: Values for Molar Mass
Hi,
Personally, I go with the exact number given in the periodic table to be more precise. Yet, I'm pretty sure in some scenarios, the problem will ask to round to a specific decimal place.
Personally, I go with the exact number given in the periodic table to be more precise. Yet, I'm pretty sure in some scenarios, the problem will ask to round to a specific decimal place.
-
- Posts: 131
- Joined: Fri Sep 24, 2021 5:28 am
Re: Values for Molar Mass
From what I have noticed from my discussion section, you can use whatever values of molar mass that you want (most likely the one from the given periodic table) as long as you round to the proper significant figures of the given values in the problem at the end of all of your calculations.
-
- Posts: 103
- Joined: Fri Sep 24, 2021 7:11 am
Re: Values for Molar Mass
I usually use whatever value is given in the periodic table so my answer can be as accurate as possible, and save the rounding for my final answer. The only occasions where I don't do that is when the molar masses are stated in a problem, then I use the values given and go from there. Hope this helps! :)
-
- Posts: 110
- Joined: Fri Sep 24, 2021 7:23 am
Re: Values for Molar Mass
Hi! I think as long as you round to either the hundredths or thousandths place your calculation should still be good depending on the number of significant figures you need. I would just make sure that you round the molar masses to the same decimal place to keep your final answer as error free as possible. However, if you do not want to round, having more sig figs in the molar masses shouldn't cause errors in your final answer. Thus, I would either round the molar masses to an appropriate number of sig figs or just keep it as it is when doing calculations.
-
- Posts: 69
- Joined: Fri Sep 24, 2021 7:20 am
Re: Values for Molar Mass
I would try not to round for as long as possible when you are doing your calculations until the very end.
As for the periodic table, there is one on Lavelle's chem14a website which I assume would be a good one to use for this class
As for the periodic table, there is one on Lavelle's chem14a website which I assume would be a good one to use for this class
-
- Posts: 100
- Joined: Fri Sep 24, 2021 6:20 am
Re: Values for Molar Mass
Hi! I was confused about this at first too because my TA would round/wouldn't round for some numbers, but I found that being more specific/using the most decimals is the best way to go because it will give you an accurate answer!
-
- Posts: 52
- Joined: Fri Sep 24, 2021 6:03 am
- Been upvoted: 1 time
Re: Values for Molar Mass
I would agree with a vast majority of these responses in that keeping the true value of the periodic table is best, especially a periodic table provided by Dr. Lavelle. When the sig figs of a problem are less than a possible molar mass of an element, that is the only time I would round.
Return to “Significant Figures”
Who is online
Users browsing this forum: No registered users and 13 guests