Pressure Units
Moderators: Chem_Mod, Chem_Admin
-
- Posts: 32
- Joined: Thu Jan 10, 2019 12:17 am
Pressure Units
Hello, I'm just wondering if we should know all of the pressure unit conversions for the midterm/ if it will be given on the exam. Some of the homework problems include conversion steps so I'm not sure.
-
- Posts: 72
- Joined: Fri Oct 12, 2018 12:16 am
Re: Pressure Units
i feel like as a general, the only one important to know is torr since that appears most frequently and some constants on the equations sheet are given also in torr. 760 torr=1atm.
-
- Posts: 62
- Joined: Fri Sep 28, 2018 12:16 am
Re: Pressure Units
Are we always supposed to being the unit for atm in terms of calculations with pressure?
-
- Posts: 61
- Joined: Fri Sep 28, 2018 12:17 am
Re: Pressure Units
Sophia Ding 1B wrote:Are we always supposed to being the unit for atm in terms of calculations with pressure?
i think it depends on which constants you use like if you use R = 0.08206 L atm/K mol then you use atm but they also give you R = 62.364 L Torr/K mol on the equation sheet
Re: Pressure Units
Most of the time, they are provided on the constants and equations sheet. You can check the sheet on his website to see if it is on there. Usually the one on his website reflects what is given to us during the tests & midterms.
-
- Posts: 69
- Joined: Fri Sep 28, 2018 12:23 am
Re: Pressure Units
There is a conversion to go from L*atm to Joules on the equation sheet, so when calculating work, you should try and get to atm in order to make the conversion to Joules. The constants/equations sheet is super helpful to look at before the test to know what you will be working with.
-
- Posts: 37
- Joined: Fri Sep 28, 2018 12:22 am
Re: Pressure Units
I think as long as you know the conversions between torr, bar, and atm, you'll be fine. Although I am not sure if he will give the values on the test or not.
-
- Posts: 60
- Joined: Fri Sep 28, 2018 12:19 am
Re: Pressure Units
While the conversion for units of pressure were not included on the last test, four different values for the gas constant (R) were provided: one includes joules, one includes atm, one includes bar, and one includes Torr. So, if your calculation involves the ideal gas law at all, chances are any pressure units will cancel out.
Return to “Calculating Work of Expansion”
Who is online
Users browsing this forum: No registered users and 6 guests