100 Gram Procedure

Moderators: Chem_Mod, Chem_Admin

Qilan Li 4I
Posts: 54
Joined: Mon Jun 17, 2019 7:23 am

100 Gram Procedure

Postby Qilan Li 4I » Thu Oct 03, 2019 9:55 pm

Why is it easier to imagine the sample mass as 100 grams when calculating the empirical formula? Also, I just want to confirm that it will only work if we calculated the mass percentage already? And this will work as long as we calculate the mass percentages from the original mass given in the problem?

nicolely2F
Posts: 149
Joined: Sat Sep 14, 2019 12:17 am

Re: 100 Gram Procedure

Postby nicolely2F » Thu Oct 03, 2019 10:05 pm

It's easier to use a 100g sample because we automatically translate the percentages into a mass in grams; there isn't a need to make a calculation. For example: an element X has a 17.8% mass composition. If you give me a 100g sample, I will immediately be able to tell that 17.8% of that sample is 17.8g. If I chose to do this with a 54g sample, I'd be putting myself through the extra trouble of calculating that. And yes, you need to have calculated the mass percentage before proceeding to the 100g step. Supposing that the original mass given is a pure sample of that substance, it will work.

Jedrick Zablan 3L
Posts: 68
Joined: Sat Aug 17, 2019 12:17 am

Re: 100 Gram Procedure

Postby Jedrick Zablan 3L » Thu Oct 03, 2019 11:16 pm

Using 100 grams makes it easier to convert from percentages to grams. For example, if the percentage is 48% then you can convert it to 48 grams since they are both out of 100. This helps you avoid extra steps and extra work to convert the percentages to masses. Hope this helps. :)

Brianna Becerra 1B
Posts: 117
Joined: Fri Aug 02, 2019 12:16 am

Re: 100 Gram Procedure

Postby Brianna Becerra 1B » Fri Oct 04, 2019 12:06 pm

When finding the percentage mass, the percentage is out of 100%. This is why pretending to have a sample of 100 grams makes calculations easier as you can easily change a percentage (63%) to be 63 grams due to the new 100 gram sample idea.

Ashley Tran 2I
Posts: 108
Joined: Thu Jul 11, 2019 12:17 am

Re: 100 Gram Procedure

Postby Ashley Tran 2I » Fri Oct 04, 2019 12:22 pm

We assume 100g of a compound when we are given the mass percent composition but not the actual mass of the compound. It is easy to use 100g because we can convert the percent to grams multiplying by 100. For example if a compound is 35% C, and we assumed the compound is 100g, then we'd have 35g of C. Which then we can use to convert to moles and divide by the lowest moles etc to find the empirical formula. However, if we were provided the total mass of the compound. We don't need to assume 100g. We can just multiply the percent composition by the total mass.


Return to “Empirical & Molecular Formulas”

Who is online

Users browsing this forum: No registered users and 3 guests