Moderators: Chem_Mod, Chem_Admin

Chris Tai 1B
Posts: 102
Joined: Sat Aug 24, 2019 12:16 am


Postby Chris Tai 1B » Mon Feb 03, 2020 11:03 pm

A calorimeter was calibrated with an electric heater, which supplied 22.5 kJ of energy as heat to the calorimeter and increased the temperature of the calorimeter and its water bath from 22.45 8C to 23.97 8C. What is the heat capacity of the calorimeter?

The equation q = nCdeltaT seems especially relevant here; do we just get rid of the n or mass term and solve for C given deltaT and q? If so, why?

Benjamin Feng 1B
Posts: 102
Joined: Sat Sep 07, 2019 12:19 am

Re: 4A.11

Postby Benjamin Feng 1B » Mon Feb 03, 2020 11:28 pm

In this case, heat capacity is only defined by energy put in vs change in temperature, q/T. This is different from specific heat, which includes units for mass. The amount of substance matters.

Sarah Zhari 1D
Posts: 103
Joined: Sat Sep 14, 2019 12:16 am

Re: 4A.11

Postby Sarah Zhari 1D » Tue Feb 04, 2020 12:12 pm

I think that because you are not required to calculate the specific heat capacity, and instead are only asked for heat capacity, mass or number of moles are not needed.

Posts: 12
Joined: Wed Sep 18, 2019 12:17 am

Re: 4A.11

Postby AysiaB1I » Wed Feb 05, 2020 10:55 pm

I'm doing this one right now and I think you only have to use the equation C = q / delta T

Posts: 60
Joined: Wed Sep 21, 2016 2:56 pm

Re: 4A.11

Postby Uisa_Manumaleuna_3E » Fri Feb 07, 2020 1:31 pm

for calorimeters we're usually just worried about the heat capacity, q / delta t, so you don't have to worry about any other formulas like that. Calorimeters are nice because usually we have a ton of info to plug in with other systems and whatnot, but calorimeters are literally just simple specific heat.

Pegah Nasseri 1K
Posts: 100
Joined: Wed Feb 27, 2019 12:15 am

Re: 4A.11

Postby Pegah Nasseri 1K » Sat Feb 08, 2020 12:56 am

Heat capacity (C) is used in the equation Q = C*delta T and represents the heat energy needed to raise the temperature of something by one degree. Molar heat capacity is used in the equation Q = n*C*delta T and is the amount of heat energy it takes to raise 1 mol of something by 1 Kelvin. Specific heat is the amount of heat energy it takes to raise 1 g of something by 1 degrees Celsius and is used in the equation Q = m*C*delta T. For this problem, it asks you for the heat capacity so you do not need to take the moles or grams into account and can just plug in the values given into the equation and solve for heat capacity: C = Q / (delta T).

Return to “Heat Capacities, Calorimeters & Calorimetry Calculations”

Who is online

Users browsing this forum: No registered users and 2 guests