Units for Work
Moderators: Chem_Mod, Chem_Admin
-
- Posts: 109
- Joined: Sat Sep 07, 2019 12:16 am
-
- Posts: 109
- Joined: Sat Sep 07, 2019 12:16 am
Re: Units for Work
I just looked it up and there is a chart in the textbook which explains that the pressure should be in Pa, and volume in m^3, so no conversions need to be done for this this equation.
-
- Posts: 50
- Joined: Wed Sep 18, 2019 12:17 am
Re: Units for Work
The SI units for pressure are Pascals and for V they are m^3. For work it is Joules so I think Pa times m^3 gives J.
-
- Posts: 102
- Joined: Fri Aug 02, 2019 12:15 am
Re: Units for Work
If you check the equation sheet online in Dr.Lavelle's website, that specific value is given to you. (101.325J=1 LXatm)
You can also derive this conversion if you divide the 2 gas constants R, ((8.314J(K)^-1,(mol)^-1) / (0.08206 Latm (K)^-1(mol)^-1). You will find that the units cancel out to give you approximately 101.325J per 1 L atm
You can also derive this conversion if you divide the 2 gas constants R, ((8.314J(K)^-1,(mol)^-1) / (0.08206 Latm (K)^-1(mol)^-1). You will find that the units cancel out to give you approximately 101.325J per 1 L atm
Re: Units for Work
From what i remember, most professors usually provide conversions on the test in the form of a formula chart or at least include a needed conversion in the question
Return to “Calculating Work of Expansion”
Who is online
Users browsing this forum: No registered users and 8 guests