Moderators: Chem_Mod, Chem_Admin

Jared Khoo 1G
Posts: 107
Joined: Wed Sep 18, 2019 12:16 am


Postby Jared Khoo 1G » Wed Feb 12, 2020 3:48 pm

Why is STP at 273.15 K (0 Celcius) and not 298 K like many constants are given at. Is there a separate constants list for values at STP?

Posts: 127
Joined: Sat Aug 17, 2019 12:18 am
Been upvoted: 2 times


Postby KaleenaJezycki_1I » Wed Feb 12, 2020 3:56 pm

STP is 25 degrees Celsius that's why its 298K. At 0 degree celsius its 273.15K because to go from celsius to kelvin you add 273.15

Bryan Chen 1H
Posts: 58
Joined: Mon Jun 17, 2019 7:24 am


Postby Bryan Chen 1H » Wed Feb 12, 2020 5:04 pm

i think 298 is 25+273 and 25 is considered "room temperature" not "standard"

Posts: 100
Joined: Wed Sep 11, 2019 12:17 am


Postby vanessas0123 » Thu Feb 13, 2020 9:44 am

You should check the constants list and if it explicitly states that it's at STP and not 298K!

Nathan Nakaguchi 1G
Posts: 102
Joined: Wed Sep 18, 2019 12:22 am
Been upvoted: 1 time


Postby Nathan Nakaguchi 1G » Thu Feb 13, 2020 10:21 am

STP is 0 Celsius, 273.15K and 1.00 atm. The equations should work the same except for when your dealing with things like where typically those constants are calculated from 298 K. Its probably best to make sure the constants you're dealing with explicitly say it was calculated from STP or 298K.

Max Madrzyk Dis 4G
Posts: 102
Joined: Wed Sep 18, 2019 12:21 am


Postby Max Madrzyk Dis 4G » Thu Feb 13, 2020 10:50 am

298 K is 25 C which is room temperature and not standard temperature.

Abhi Vempati 2H
Posts: 104
Joined: Fri Aug 09, 2019 12:17 am


Postby Abhi Vempati 2H » Thu Feb 13, 2020 1:50 pm

STP, which is standard temperature and pressure, is 1 atm and 273 K (273.15, to be specific).

This is often confused with standard state/standard conditions, which is 298 K, This is also referred to as room temperature.

Hope this helps!

kendal mccarthy
Posts: 109
Joined: Wed Nov 14, 2018 12:22 am


Postby kendal mccarthy » Sun Feb 16, 2020 9:47 pm

STP is just 273.15K and 1 atm. These values are mainly just for theoretical calculations because 0K is not feasible in everyday life.

Return to “Ideal Gases”

Who is online

Users browsing this forum: No registered users and 0 guests