Ecell values
Moderators: Chem_Mod, Chem_Admin
-
- Posts: 153
- Joined: Fri Aug 30, 2019 12:16 am
Ecell values
How can you tell which half reaction is being reduced or oxidized based on the Ecell value? There was a question like this on test 2 and I am confused as to how you would distinguish this based on just the standard potential value.
-
- Posts: 116
- Joined: Sat Sep 14, 2019 12:17 am
-
- Posts: 100
- Joined: Thu Jul 11, 2019 12:17 am
Re: Ecell values
You can use the appendix to look at the E values for the two half reactions. Since the equation for Ecell is E(c) = E(cath) - E(anode), then you can determine which reaction is cathode and which one is anode.
-
- Posts: 101
- Joined: Sat Aug 17, 2019 12:15 am
Re: Ecell values
The one with a higher, more positive Ecell value is usually reduced while the one with a lower, more negative Ecell value is usually oxidized.
Re: Ecell values
Since most tables give the reduction potential for the half reaction, the higher (more positive) reduction potential determines the cathode which is the species that will undergo reduction.
-
- Posts: 100
- Joined: Sat Aug 17, 2019 12:17 am
Re: Ecell values
the one that has a higher (more positive) value is usually the one that is reduced aka the cathode
-
- Posts: 101
- Joined: Sat Aug 17, 2019 12:16 am
Re: Ecell values
The more positive value is reduced so that when you subtract the anode's value it'll remain positive
-
- Posts: 107
- Joined: Sat Sep 14, 2019 12:17 am
Re: Ecell values
along with the responses above, I also try to consider which assignment of the cathode or anode will result in a positive Eº cell value
-
- Posts: 55
- Joined: Sat Aug 24, 2019 12:16 am
Re: Ecell values
In addition to the answers given, the reason we want to have a positive E cell is because it leads to a negative standard gibbs free energy which in turn means a positive value for entropy meaning the process is spontaneous.
-
- Posts: 97
- Joined: Thu Jul 25, 2019 12:17 am
Re: Ecell values
The more positive E cell value corresponds to the reaction that is reduced. This reaction occurs at the cathode.
-
- Posts: 106
- Joined: Sat Aug 17, 2019 12:16 am
- Been upvoted: 1 time
Re: Ecell values
If you take the reverse of a reaction, does the sign of the Ecell also flip, or does it remain? For example, when constructing redox reactions from redox couples you are given, you determine which couple is at the anode and at the cathode by examining Ecell values. You set up the reaction in a way that yields a positive Ecell based on the corresponding cell potentials. Determining which redox couple is the anode and cathode also allows you to figure out what is being oxidized and what is being reduced.
Once you know which half-reaction is being oxidized, you flip it for the overall reaction (ex: Zn(2+) + 2e- ==> Zn(s) becomes Zn(s) ==> Zn(2+) + 2e) When the reaction is flipped, does the cell potential sign change too??
Once you know which half-reaction is being oxidized, you flip it for the overall reaction (ex: Zn(2+) + 2e- ==> Zn(s) becomes Zn(s) ==> Zn(2+) + 2e) When the reaction is flipped, does the cell potential sign change too??
-
- Posts: 104
- Joined: Wed Sep 18, 2019 12:21 am
Re: Ecell values
The higher Ecell value is usually reduced because the E cell values are the standard values of reduction. One that produces a higher value that is reduced is more likely to be reduced in a reaction.
-
- Posts: 107
- Joined: Wed Sep 18, 2019 12:21 am
- Been upvoted: 1 time
Re: Ecell values
The more positive/less negative Ecell value is typically correlated to the cathode (reduced), and the more negative Ecell value is correlated to the anode (oxidized).
Return to “Balancing Redox Reactions”
Who is online
Users browsing this forum: No registered users and 4 guests