Closed Systems  [ENDORSED]

Moderators: Chem_Mod, Chem_Admin

manasa933
Posts: 72
Joined: Fri Sep 29, 2017 7:04 am

Closed Systems

Postby manasa933 » Fri Jan 19, 2018 8:36 pm

What's a method to increase the internal energy of a closed system?

Rachel Formaker 1E
Posts: 86
Joined: Fri Sep 29, 2017 7:04 am
Been upvoted: 2 times

Re: Closed Systems

Postby Rachel Formaker 1E » Fri Jan 19, 2018 8:43 pm

To increase the internal energy of a closed system, you can heat the system and/or perform work on the system.
You can heat the system using an external heat source, and you can perform work on a system by compressing the system (like compressing a bike pump).

kaushalrao2H
Posts: 63
Joined: Thu Jul 13, 2017 3:00 am
Been upvoted: 2 times

Re: Closed Systems

Postby kaushalrao2H » Fri Jan 19, 2018 9:19 pm

Yes the above reply is correct. Recall that in a closed system, energy can be transferred by the system to the surroundings, but matter cannot be transferred by the system to the surroundings. Therefore, the internal energy of the system can be changed by work and heat applied to or by the system to/from the surroundings.

nathansalce 3e
Posts: 52
Joined: Thu Jul 27, 2017 3:01 am

Re: Closed Systems

Postby nathansalce 3e » Fri Jan 19, 2018 11:21 pm

It is only isolated systems where neither matter nor energy can be transferred in or out of the system. In a closed system, energy is freely transferred throughout the system, but not matter. Heating or cooling by altering the surrounding temperature will have an effect in energy of the system

Sarah 2F
Posts: 33
Joined: Fri Sep 29, 2017 7:06 am

Re: Closed Systems

Postby Sarah 2F » Thu Jan 25, 2018 9:57 am

In a closed system you can add or subtract heat or do work to it since energy can pass through.

Guangyu Li 2J
Posts: 50
Joined: Fri Sep 29, 2017 7:07 am
Been upvoted: 1 time

Re: Closed Systems

Postby Guangyu Li 2J » Fri Jan 26, 2018 11:09 am

A closed system can have energy exchange with the surroundings

According to the equation: △U=q+w, you can both haet the container (closed system) or do work on the system.

Hope this helps!

Warda Sahib 2J
Posts: 29
Joined: Thu Jul 13, 2017 3:00 am

Re: Closed Systems

Postby Warda Sahib 2J » Sun Jan 28, 2018 2:52 pm

Because energy is transferred in closed systems, adding or subtracting heat will affect the energy.

CalebBurns3L
Posts: 47
Joined: Fri Sep 29, 2017 7:07 am

Re: Closed Systems

Postby CalebBurns3L » Fri Feb 02, 2018 12:37 pm

You can increase the internal energy of a closed system by adding heat to it or performing work on the system.

Jessica Benitez 1K
Posts: 50
Joined: Fri Sep 29, 2017 7:04 am

Re: Closed Systems  [ENDORSED]

Postby Jessica Benitez 1K » Sat Feb 03, 2018 9:35 pm

For a closed system, we can change the energy of the system by heating or cooling it as well as by doing work on it. An example in the notes of work done on the system is compressing a piston or letting the system do work on the surroundings causing the piston to move out.
For an open system, we can add or remove the amount of substance in the system.


Return to “Phase Changes & Related Calculations”

Who is online

Users browsing this forum: No registered users and 0 guests