Fastest way to balance chemical equation

Moderators: Chem_Mod, Chem_Admin

Kalsuda Lapborisuth 1B
Posts: 27
Joined: Fri Apr 06, 2018 11:03 am

Fastest way to balance chemical equation

Postby Kalsuda Lapborisuth 1B » Tue Apr 10, 2018 11:43 am

While I know that guess and check is usually the typical method to balancing equation, are there tips on points I should look out for or things I should do first to make balancing complex equation faster?

Toru Fiberesima 1L
Posts: 63
Joined: Fri Apr 06, 2018 11:02 am

Re: Fastest way to balance chemical equation

Postby Toru Fiberesima 1L » Tue Apr 10, 2018 4:46 pm

start by balancing the atoms with the highest number of atoms in the reaction. Typically you leave balancing oxygen and/or hydrogen until last

Jasmine Emtage-1J
Posts: 24
Joined: Fri Apr 06, 2018 11:02 am

Re: Fastest way to balance chemical equation

Postby Jasmine Emtage-1J » Wed Apr 11, 2018 5:44 pm

Another tip is to balance any freestanding elements last because they're the easiest to manipulate.

Alexander Hari 1L
Posts: 30
Joined: Wed Feb 14, 2018 3:02 am

Re: Fastest way to balance chemical equation

Postby Alexander Hari 1L » Wed Apr 11, 2018 5:54 pm

When I am balancing an equation that contains O2, I usually leave that for last because it can simply be multiplied at the end with the rest of the equation balanced. Also, if it is a relatively long chemical equation I write each individual element on its own and its corresponding amount on both the reactants/products side and manipulate from there.
Ex) Al + HCl--> AlCl3 + H2
Al=1 Al=1
H=1 H=2
Cl=1 Cl=3

then you start balancing (in this case I would balance AlCl3 first since it has an odd number and we want to get rid of those to make it easier)
Balanced) (2)Al + (6)HCl--> (2)AlCl3 + (3)H2

jessicasam
Posts: 36
Joined: Wed Nov 15, 2017 3:02 am
Been upvoted: 1 time

Re: Fastest way to balance chemical equation

Postby jessicasam » Wed Apr 11, 2018 8:37 pm

I'm not sure if this is the fastest way, but if you are stuck the easiest way to start is by making a system of equations. For example if you have the reaction HF + SiO2 --> SiF4 + H20 then you can set that up as

aHF + bSiO2 --> cSiF4 + dH20

For each element go through so

H: 1a= 2d
F: 1a= 4c
Si: 1b= 1c
O: 2b=1d

If you assume a=1 then

a=1
d=1/2
c=1/4
b=1/4

multiply these all by 4 so there are no fractions
a=4
d=2
c=1
b=1

those are the coefficients so
4HF + SiO2 --> SiF4 + 2H2

Naqiyah Qadir 1I
Posts: 5
Joined: Fri Apr 06, 2018 11:04 am

Re: Fastest way to balance chemical equation

Postby Naqiyah Qadir 1I » Thu Apr 12, 2018 12:43 pm

My T.A. showed us how to solve harder "balancing equations" problems using a system of equations. You basically replace all the stoichiometry coefficients with variables and write an equation for each element (based on how many moles there are, reactant=products). Then just substitute/eliminate to find the value of each variable!

Jacy Black 1C
Posts: 30
Joined: Fri Apr 06, 2018 11:01 am

Fastest way to balance chemical equation

Postby Jacy Black 1C » Thu Apr 12, 2018 1:33 pm

I similarly have trouble not with the simple chemical equations, but balancing the harder chemical equations. The test 1 we just took featured longer, more complicated chemical equations, and I didn't even know where to begin. It seemed like every element I balanced affected another and another, and it was a complicated endless cycle. Any tips for how to break down the most complicated ones, where there the same elements are featured multiple times?

Jessica Lancisi - 1I
Posts: 29
Joined: Fri Apr 06, 2018 11:03 am

Re: Fastest way to balance chemical equation

Postby Jessica Lancisi - 1I » Thu Apr 12, 2018 10:09 pm

for the equations that seem to never balance-meaning you feel like you just keep adding and adding coefficients, I think the fastest way would probably be to use a system of equations. to do this you would label the coefficients for each piece of the reaction as a through d, and come up with a system of equations. you then would say for example "let A = 1" and use substitution to find all the other coefficiets

Hope_Pham_1G
Posts: 29
Joined: Fri Apr 06, 2018 11:04 am

Re: Fastest way to balance chemical equation

Postby Hope_Pham_1G » Sun Apr 15, 2018 11:41 pm

A fast way to know whether to increase the stoichiometric coefficient of an equation is recognizing that an odd number of elements such as oxygen on one side does not match the even number of say O2 (oxygen as a diatomic molecule).

Hope_Pham_1G
Posts: 29
Joined: Fri Apr 06, 2018 11:04 am

Re: Fastest way to balance chemical equation

Postby Hope_Pham_1G » Sun Apr 15, 2018 11:42 pm

A fast way to know whether to increase the stoichiometric coefficient of an equation is recognizing that an odd number of elements such as oxygen on one side does not match the even number of say O2 (oxygen as a diatomic molecule).


Return to “Balancing Chemical Reactions”

Who is online

Users browsing this forum: No registered users and 0 guests